BREMBO Prime 08.5085.31 Piduriketas ABARTH 500 / 595 / 695 240x11mm, 4, täis, perforeeritud

BREMBO Prime Brake Disc 08.5085.31 – High-performance perforated rear disc for Abarth 500, 595 and 695

The BREMBO Prime Brake Disc 08.5085.31 represents Italian engineering excellence – designed for performance enthusiasts who demand superior braking power and style. Manufactured by BREMBO, the world-renowned brake specialist and OEM supplier to premium automotive brands, this high-performance solid brake disc delivers exceptional stopping power and enhanced heat dissipation for sporty driving conditions. Technical specifications include an outer diameter of 240.0 mm, a disc thickness of 11.0 mm and perforated design for optimal cooling.

The 08.5085.31 BREMBO Prime brake disc features a solid construction with 4 mounting holes and perforated surface for improved heat management. The perforations not only enhance cooling efficiency but also provide superior wet weather performance by dispersing water and debris. Made from high-quality cast iron with BREMBO's advanced metallurgy, this brake disc comes with anti-corrosion coating and meets all European ECE R90 safety standards for maximum reliability.

Which vehicles are compatible with the BREMBO 08.5085.31?

For which Abarth models is the BREMBO Prime 08.5085.31 brake disc suitable?

This brake disc is compatible with certain variants of the following Abarth models: Abarth 500 / 595 / 695 Hatchback (2008–present) and Abarth 500С / 595C / 695C Convertible (2009–present). The BREMBO 08.5085.31 brake disc is specifically engineered to handle the increased performance demands of these sporty vehicles. Some trims have different specifications for brake discs, so you should always check via VIN and OEN to ensure compatibility.

Installation instructions for BREMBO Prime 08.5085.31

1. Replace brake discs in pairs to ensure balanced braking performance across both front wheels.

2. Consult the vehicle's service manual for the specific removal sequence and torque values.

3. Secure the vehicle on level ground and remove the front wheels. Support the brake caliper to prevent strain on the brake lines.

4. Remove the old disc: Carefully loosen the retaining screws. For seized screws, apply penetrating oil.

5. Thoroughly clean the hub surface from rust, brake dust, and debris before installing the new BREMBO disc.

6. Install the new perforated disc and brake pads, ensuring proper alignment. Tighten retaining screws and caliper bolts to manufacturer specifications.

7. After installation, pump the brake pedal several times to seat the pads and check brake fluid level in the reservoir.

8. Bedding-in: Follow the vehicle manufacturer's recommendations; if none are provided, drive for at least 200 km using gentle, brief brake applications, avoiding hard braking and ABS activation during this period.

FAQ: BREMBO Prime Brake Disc 08.5085.31

Is the BREMBO Prime brake disc 08.5085.31 suitable for Abarth 595 track use?

Despite the perforated design of this BREMBO brake disc, it is intended for road use on Abarth 595 models. The perforations provide enhanced cooling and consistent performance under high-stress conditions, but the GT Kit line, not Prime, is intended for track use.

Can I install the BREMBO 08.5085.31 on my Abarth 500С Convertible?

Possibly. The BREMBO Prime 08.5085.31 is compatible with many Abarth 500С Convertible models, providing the same high-performance braking characteristics as the hardtop versions. Consult the VIN and OEN to ensure the part is appropriate.

What are the benefits of perforated brake discs for Abarth 695?

For Abarth 695 models, perforated discs offer superior heat dissipation, reduced brake fade, better wet weather performance, and enhanced visual appeal while maintaining the sporty character of the vehicle.

Do the brake pads need to be replaced at the same time as the BREMBO brake disc 08.5085.31?

Yes, it is highly recommended to replace brake pads together with new brake discs. This ensures optimal surface contact, proper bedding-in, and maximum braking performance from your new BREMBO components.

Is the BREMBO brake disc 08.5085.31 ventilated or solid?

This brake disc is solid construction with perforated design. The perforations provide cooling benefits similar to ventilated discs while maintaining the structural integrity needed for compact performance vehicles.

How should new brake discs be properly bedded in?

During the first 200 km, avoid aggressive braking and allow gradual heat cycling. Perform moderate braking from highway speeds to allow proper friction material transfer to the perforated surface.

What is the outer diameter and thickness of this brake disc?

The Brake disc BREMBO Prime 08.5085.31 has an outer diameter of 240 mm and thickness of 11 mm – perfectly sized for Abarth's compact performance platform while providing excellent stopping power.

Is this brake disc suitable for vehicles with ABS?

Yes, the BREMBO Prime 08.5085.31 is mainly compatible with ABS-equipped vehicles. The perforated design works seamlessly with modern brake assistance systems for optimal safety.

Do I need special tools to install the BREMBO brake disc?

Special tools are usually not required for installation of the BREMBO 08.5085.31. Standard automotive tools including socket wrenches and a torque wrench for proper bolt tightening are sufficient for professional installation. However, some trims may have features that necessitate the use of other tools or equipment. Consult the service manual to be sure.

What are the advantages of the BREMBO brake disc 08.5085.31 compared to other models?

The Prime 08.5085.31 BREMBO brake disc offers excellent heat management through perforated design, premium cast iron construction, enhanced wet weather performance, and the reliability that comes with BREMBO's racing heritage and OEM quality standards.